The product shows excellent formability and bake hardening response. Due to its superior in-service strength, this alloy is ideal for down-gauging both skin and structure components. All values listed are typical.

Temper	UTS (Rm)	YS (Rp0.2)	Total Elongation A80
T4 Delivery	≥245 MPa	≤125 MPa	≥25%
2% pre-strain + 20 min @185°C	≥330 MPa	≤255 MPa	≥16%

The chemical composition of this product corresponds to AA6111.

Si	Fe	Cu	Mn	Mg	Cr
0.60 - 1.1	≤ 0.40	0.50 - 0.90	0.10 - 0.45	0.50 - 1.0	≤ 0.10
Zn	Ti	V	Others, each	Others	Other, total
≤ 0.15	≤ 0.10	N/A	≤ 0.05	N/A	≤ 0.15

*Only in European production of this product.

Density	2.7 x 10³ kg/m³
Elastic Modulus	70,000 N/mm²
Coefficient of Thermal Expansion	23.4 x 10-6 K-1
Thermal Conductivity	160 – 190 W/mK
Electrical Conductivity	23 – 27 m/Ωmm²

Our manufacturing footprint allows us to tailor solutions for auto-makers around the world. Novelis Advanz™ 6HS – s625 is produced in the following locations:

Europe

Acid Etch TiZr PT3 AlubVS MP-404 E1 DC290 PL39SX

Additional services may be available through our distributors, please contact your Novelis sales representative for more information.

Cut-to-length Laser Blank Edge Trimming Slitting

Additional services may be available through our distributors, please contact your Novelis sales representative for more information.

0.9-3.0mm

Please contact your Novelis sales representative for more information about available widths and gauges.